Measuring instruments

Home / Products / Instrumentation & Ionisation / Measuring instruments
  • Charge plate set for EFM-022 Fieldmeter

    Charge plate set for EFM-022 Fieldmeter

    Set includes: 9V rechargeable battery and power adaptator, grounding cables & crocodile clip, charge plate set (CPS base, plate capacitor, HV generator).

    Can not work without Fieldmeter EFM-022 (61-200-0220RoHS).

  • Complete kit : EFM-022 Fieldmeter + charge plate set

    Complete kit : EFM-022 Fieldmeter + charge plate set

    Takes precise measurements of static charges with automatic distance conversion (choice of 5 pre-set distances). With the charge plate set included, can be used as a charge plate monitor for the supervision of air ionizers.

    Included in the kit: Fieldmeter+pair of 2cm guides, 9V rechargeable battery and power adaptator, grounding cables & crocodile clip, charge plate set (CPS base, plate capacitor, HV generator) and certificate of calibration.

  • Counting Scale CXB series

    Counting Scale CXB series

    Counting Scale CXB series

    · Precise counting: The automatic reference weight optimisation of reference weight gradually improves the average piece weight value

    · Programmable using numerical key pad:

    – required reference quantity

    – known reference weight

    · Three displays for weight display (verifiable), reference weight, total pieces

    · Fill-to-target function: Target count or target weight can be programmed. When the target weight is reached there is an audible and visual signal

    · 10 memories for reference weights

    · Counting results memory: adds up all individual piece counts, result is shown in total weight and total pieces

    Select options This product has multiple variants. The options may be chosen on the product page
  • Counting Scale IFS series

    Counting Scale IFS series

    Counting Scale IFS series

    · Ergonomic display device with large keypad and high-contrast display for easy entry and reading of, e.g., tare weights, reference weights, limit values etc.

    · Three displays for weight display (verifiable), reference weight, total pieces

    · 100 item memories for master data such as reference weight, reference quantity, container weight (PRE-TARE) etc.

    · Precise counting: The manual reference weight optimisation gradually improves the average

    Select options This product has multiple variants. The options may be chosen on the product page
  • EFM-022 Fieldmeter

    EFM-022 Fieldmeter

    Takes precise measurements of static charges with automatic distance conversion (choice of 5 pre-set distances).

    With optional charge analyzer (61-200-0221RoHS), can be used as a charge plate monitor for the supervision of air ionizers.

  • Eurostat surface resistivity meter

    Eurostat surface resistivity meter

    Surface resistivity meter

    Dimensions: 130x70x25mm

    Weight: 170 g

    Power: 1 x 9V PP3 battery (supplied with the tester)

    Display: 3 green led, 6 yellow led, 2 red led

    Voltage & measurement process: Method of parallel bars (ASTM D-257)

    Packaging: Supplied in a PVC pouch with ground leakage

  • Flux Pen

    Flux Pen

    Flux Pen

    PN: 41-092-0022

    CONTROLLED RELEASE PEN APPLICATORS

    • Ideal for touch-up, repair and/or light assembly

    • of TAB, surface mount and high density boards as

    well as ceramic substrates

    • Controlled pin-point release

    • Pen applicators for fluxing and cleaning

    • User-friendly

    • Safe, quick and cost-effective

    • Simple, efficient, easy-to-use for difficult to

    • reach areas

    • Replaceable tips

  • PHT-771 Prostat Digital Psychrometer

    PHT-771 Prostat Digital Psychrometer

    Digital Psychrometer

    The PHT-771 offers several operational functions such as “hold data” and ºF or ºC selection. Two AAA batteries are included and provide up to 80 hours of operation.

    Specifications

    Input Power: 2 each AAA Alkaline Batteries. Battery provide up to 80

    hours of operation.

    Relative Humidity Range: 0.0 to 100.0% RH

    Temperature Range: -4 to 122 ºF (-20 to 50 ºC)

    Temperature Accuracy: ±1.8 ºF (±1 ºC)

    Display: Triple LCD

    Dew Point: -90.4 to 122.0 ºF (-68 to 50 ºC) (calculated from RH and Air temperature measurements)

    Wet Bulb: -6.88 to 122.0 ºF (-21.6 to 50 ºC) (calculated from RH and Air temperature measurements)

    Response Time: Approximately 60 Seconds

    Auto Off: Automatic power off after 20 minutes to prevent battery drains when not in use

    Operating Conditions: -4 to 122 ºF (-20 to 50 ºC); < 99% RH non-condensing

    Storage Conditions: -40 to 185 ºF (-40 to 85 ºC); < 99% RH non-condensing

    Dimensions (W x L x D): 1.9” x 7” x 1” (4.8 cm x 17.8 cm x 2.5 cm)

    Weight: 2.8 oz (79g)

  • Platform scale EOC series

    Platform scale EOC series

    Counting Scale CXB series

    High mobility: thanks to rechargeable battery operation (optional), compact, lightweight construction, it is suitable for the use in several locations (laboratory, production, quality control, commissioning etc.)

    · Platform: weighing plate of stainless steel, painted steel base, silicone-coated aluminium load cell with protection against dust and water splashes IP65. Level indicator and levelling feet for precise levelling of the scale, fitted as standard, to give the most accurate weighing result

    · Weighing with tolerance range (checkweighing): a visual and audible signal helps with portioning, dispensing or grading

    · Hold function: When the weighing conditions are unstable, a stable weight is calculated determining an average value

    · Benchtop stand incl. wall mount for display device as standard

    Select options This product has multiple variants. The options may be chosen on the product page
  • Precision scale PCB series

    Precision scale PCB series

    Precision scale PCB series

    Compatible with school-specific software solutions such as, for example, Vernier ® or LabQuest ®. Thanks to the KERN School Protocol, as part of technical experiments, weighing data can be transferred to a PC, laptop, etc. for evaluation and display using the USB data interface

    · Industry 4.0: The integrated KERN Universal Port (KUP) allows the connection of external KUP interface adapters such as RS-232, USB, Bluetooth, WLAN, Analogue, Ethernet etc. The outstanding advantage here is that the KUP interface adapters are simply plugged in, i.e. retrofitting interfaces is conveniently possible without opening the scale housing or complicated installation.

    Select options This product has multiple variants. The options may be chosen on the product page
  • PRF-911PT ESD Packaging Test Kit

    PRF-911PT ESD Packaging Test Kit

    ESD Packaging Test Kit

    Specifications:

    -Surface resistance measurements per ANSI/ESD STM11.11

    -Volume resistance measurements per ANSI/ESD STM11.12

    -Meets the requirements of IEC 61340-2-3

    -Approximates surface and volume resistivity measurements per ASTM D-257

    -Resistance measurements of ESD packaging

    -Ideal for measuring static shielding and antistatic bags

    -Will also measure the resistance of moisture barrier bags

    -Includes the PRS-801B Wide Range Resistance System

    -Also includes a 5lbs weight

    -Packaged in a hard shell carrying case

    -Certificate of Calibration Traceable to NIST included

  • Prostat Concentric Ring Microprobe PRF-912B

    Prostat Concentric Ring Microprobe PRF-912B

    Accurately measures surface resistance of small areas. 

    Measurements up to 1×10^12 Ohm.

    Designed to work with a precise wide range resistance instrument, such as PRS-801 tera-ohm meter.